Universal Pin-on Bucket to Skid Loader-Compatible Quick Attach Conversion

$1,499.00

Please Note: Many of the Quick Attach Kits may require as long as 60 days or more to build and ship due to supply chain issues. We apologize for the inconvenience and are working with the factory to reduce lead times.

  • Converts any front end loader to skid loader compatible quick attach
  • Constructed of heavy gauge steel to ensure that the quick attach will last the life of your loader
  • Two spring-loaded, over-center latches hold attachments firmly in place on the loader
  • Latching pins are hardened and tapered for easy operation and long life
  • Frame is 43 1/4″ wide.  A wider frame is available for loaders with greater distances between arms
  • American made
  • Weight of Tach-All frame is 150 lbs.
  • Weight of weld-on bucket bracket is 41 lbs.

 

MAKE SURE THAT THE ADDITIONAL WEIGHT OF THE TACH-ALL AND WELD-ON BUCKET CONVERSIONS LEAVE ENOUGH USEABLE LIFT CAPACITY FOR YOUR FRONT END LOADER…THIS CAN BE AN ISSUE ON SMALLER TRACTORS!!!

Sign Up For Mike's Monthly Newsletter

Tips and Special Offers Right To Your Mailbox Learn About Our Newest Products!

If you’ve hit nothing but dead ends trying to find a quick attach conversion for you front end loader, don’t despair!  This Universal Tach-All Quick Attach Conversion Kit and some blacksmith work and you’ve made your front end loader skid loader quick attach compatible.  Here are the steps toward getting it done…

  1. Remove your pin-on bucket from the tractor.
  2. Carefully cut off the brackets that held the bucket to the front end loader.
  3. Weld those brackets to the Tach-All blank plate being careful to maintain the same spacing that was on the original bucket.
  4. Paint the new quick attach assembly and reinstall on the front end loader.
  5. Weld the new skid loader female bracket (supplied in the kit) on the bucket.
  6. Paint the bracket and the back of the bucket.

Now, any attachment that fits a front end loader will fit your tractor.  It opens up a whole new world of versatility!

THE TACH-ALL SYSTEM

QUICK AND EASY-The Tach-All™ quick attach is an innovative bracket for tractor loaders that allows attachment changes to be made quickly and easily. Just unlatch the quick attach, and back out of one attachment or bucket; drive into another one, pick it up, latch the handles and go – just like a skid-steer loader.

SKID STEER COMPATIBILITY This bracket is named the Tach-All quick attach for a reason. It allows you to use various attachments that you may already have in your fleet. Swap attachments with most of the current models of skid steer loaders – a benefit that can save you hundreds of dollars.

ADDED VERSATILITY A quick attach on your loader allows you to do much more than just move dirt. Now your loader can be a versatile tool carrier. Pallet forks, snow blades, tree diggers, bale spears, grapples, scarifiers, three-point hitch adapters, and manure forks are just some of the attachments that you can use on your loader. Using more attachments, allows your loader to perform a wider variety of jobs. This gives you the ability to become more profitable.

ADDS MANEUVERABILITY The quick attach is not only helpful in what it can take on, but also in what it can take off. The loader bucket can be quickly removed to reduce the space needed to maneuver the tractor. When you need your bucket again it can be re-installed quickly.

QUALITY CONSTRUCTION The blank frame is constructed of heavy gauge steel to ensure that the quick attach will last the life of your loader. Two spring-loaded, over-center latches hold attachments firmly in place on the loader. The latching pins are hardened and tapered for easy operation and long life.

Additional information

Weight 241 lbs
Dimensions 48 × 34 × 10 in

Reviews

There are no reviews yet.

Be the first to review “Universal Pin-on Bucket to Skid Loader-Compatible Quick Attach Conversion”

Your email address will not be published. Required fields are marked *