- Converts Mahindra Max24L front end loaders with pin-on buckets to allow the use of skid loader compatible universal attachments.
- Standard duty weld-on 1/4″ bracket to weld to existing bucket (after pin brackets are removed) included
- Allows the use of skid steer-type attachments
- Weight 85 lbs.
- Maximum Capacity 1,500 lbs.*
- Shipped less pins (use existing pins)
*Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity.
This is an attachment carrier only. Do not use for back dragging.
Mahindra Max24L Front End Loader Pin-Style Bucket to Skid Steer Quick Attach Conversion
If you have a Mahindra Max24L front end loader loader with a pin-on bucket and wish you could have a quick attach system so you could change attachments, this is the kit for you! It converts any Max24L with pin-on type buckets to allow the use of skid steer-compatible attachments. In other words, with this kit on the front of your tractor, any attachment that mounts to a skid loader can now mount to your tractor. It opens up a whole new world of versatility! If you want to mount pallet forks, or a bale spike, or a snowblower on your tractor, all you have to do is pull up a couple of levers and you can change attachments in seconds. This kit does require changing the pin-on brackets on your loader bucket to quick attach, by cutting off the pin-style mounts and welding a new face plate (included in this kit) on the bucket, which any welding shop should be able to complete. Once installed you’ll be able to effortlessly switch between front loader attachments and remove them if they’re in the way.
Please note: this kit is shipped without pins, you’ll need to save and use your existing loader pins to mount it. Also, always check to make sure aftermarket attachments are within the recommended lift capacity of your tractor and front end loader before purchasing.