Pat’s Easy Change
Pat’s Easy Change Three Point Tractor Quick Hitch system is patented. Don’t be fooled by cheap imitations!
Here’s a hitch system that is truly universal. No other system has the set screws and u-bolts for stabilization. Our system comes with shims to adjust our hitches to your tractor. Our spring loaded latch system is the only one like it available on the market.
Plus, our product is American made of quality hot rolled steel.
Pat’s Easy Change is the answer when you’re looking for the quickest and most pain-free way of changing three point tractor implements!
|Dimensions||18 × 10 × 6 in|
|Tractor Lower Link Size||
Category I (7/8" holes), Category II (1 1/8" holes), Category III (1 7/16" holes), Category I (without stabilizer), Category II (without stabilizer), Category III (without stabilizer), Category I to II (tractor is I, implements are II), Category II to I (tractor is II, implements are I), Category I to II (without stabilizer), Category II to I (without stabilizer), Category #I Weld On, Category #II Weld On, Category #III Weld On, Category #I Weld On (without stabilizer), Category #II Weld On (without stabilizer), Category #III Weld On (without stabilizer)
$169.99 – $244.00
Looking for the magic formula to make hooking up three point implements easier? Here it is!
Pat’s Easy Change is an “eagle claw” attachment that goes on each of the lower link arms – what you see on a lot of larger tractors.
To attach an implement, just back up under the pins, lift up the three point and you’re hooked on, except for the top link. The only disadvantage of this product is that you have to get off the seat to put the top link on. But with a PTO-powered implement, you’ll have to do that anyway. When you want to unhook, just move the keepers to the side, pull up up the links and lower your three point. It’s pretty simple.
Pat’s system has a rod that keeps the lower link arms at the correct width when backing up. If you have multiple implements you’ll want to put a mark on the rod for each one. That way, you can set the correct width for the implement before backing up.
Before ordering Pat’s Easy Change, determine what category size your lower links are. They’re offered in category I or category II configurations. Measure your tractor’s lower three point arm ball holes to determine the category. 7/8″ is category I and 1 1/16″ is category II.
You can installation Pat’s Easy Change system in about thirty minutes. You’ll be impressed by how secure they are when they’re mounted properly. It’s one of those products that will make your tractor-owning experience a lot easier.