• Converts New Holland 100LC front end loaders with pin-on buckets to allow the use of skid loader compatible universal attachments.
  • Standard duty weld-on 1/4″ bracket to weld to existing bucket (after pin brackets are removed) included
  • Allows the use of skid steer-type attachments
  • Weight 95 lbs.
  • Maximum Capacity 1,200 lbs.*
  • Shipped with 25mm x 127mm greaseable pins

 

 

  • READ AND UNDERSTAND OPERATOR’S MANUAL BEFORE OPERATION.

*Note: Maximum capacity is that of the adapter bracket. Do not exceed it or loader/tractor operating lift capacity.

This is an attachment carrier only. Do not use for back dragging.

New Holland 100LC Front End Loader Pin-Style Bucket to Skid Steer Quick Attach Conversion

$895.00

If you have a New Holland 100LC front end loader loader with a pin-on bucket and wish you could have a quick attach system so you could change attachments, this is the kit for you! It converts any of these model loaders with pin-on type buckets to allow the use of skid steer-compatible attachments. In other words, with this kit on the front of your tractor, any attachment that mounts to a skid loader can now mount to your tractor. It opens up a whole new world of versatility! If you want to mount pallet forks, or a bale spike, or a snowblower on your tractor, all you have to do is pull up a couple of levers and you can change attachments in seconds. This kit does require changing the pin-on brackets on your loader bucket to quick attach, by cutting off the pin-style mounts and welding a new face plate (included in this kit) on the bucket, which any welding shop should be able to complete. Once installed you’ll be able to effortlessly switch between front loader attachments and remove them if they’re in the way.

Please note: this kit is shipped with new 25mm x 127mm greasable pins. Also, always check to make sure aftermarket attachments are within the recommended lift capacity of your tractor and front end loader before purchasing.

Share or Email This Post

Additional information

Weight204 lbs
Dimensions54 × 44 × 25 in

Reviews

There are no reviews yet.

Be the first to review “New Holland 100LC Front End Loader Pin-Style Bucket to Skid Steer Quick Attach Conversion”

Your email address will not be published. Required fields are marked *