Why Get an LED DUAL Tractor Light Bar?

One of the craziest design quirks of a non-cab tractor is the way the lights work – or they don’t!  The headlights on tractors with front end loaders shine right into the loader bucket, or pallet forks, or whatever is mounted on the tractor.  So, unless you raise the loader frame up to a potentially dangerously high position, the lights shine right into your attachment and can actually inhibit your nighttime visibility.  I’ve even turned my tractor lights off and been able to see better without the glare shining back into my eyes.

When we unveiled the RBI (Roll Bar Illumination) Light Bar in 2020 we were almost immediately contacted by customers who loved the concept, but wanted additional light to the rear of the tractor.  We searched the world for a light that shown both forward and reverse and found that no one seem to make one, so we crafted an alternative that functions much better.  The “RBI DUAL” light has one row of lights facing forward, one facing back, and two switches.  If you’re using a front end loader, you may just want the light facing forward on.  If you’re hooking up a three-point attachment, you may only want the rear light on.  If you’re bush-hogging, you may want both on.  With the “RBI DUAL” deluxe kit you have all of these options.

The  “RBI DUAL” LED tractor light bar mounts in seconds with with strong magnets, and is a great combination to improve illumination on your tractor. The strong LED tractor lights, mounted on the underside of the ROPS extends your work day and helps you get evening chores done safely.  These ROPS lights utilize a forward facing 72 Watt, 5280 Lumens combo flood/spot beam for maximum lighting and a similar light bar facing the back of the tractor.  The LED tractor light bar easily mounts on your tractor  roll bar or ROPS with the magnets.

The “RBI DUAL” Tractor Light mounts to the tractor roll bar in a fraction of a second with a pair of powerful magnets.  It connects to a switch box which mounts on the side of the ROPS (roll over protection structure) with another magnet, and includes a 22′ wire to go to the battery with a built-in fuse.  Installation of the lights and the switch takes under a minute, running the connection to the battery can take longer to hide the wires in protected areas, but from the box to having adequate light should take 30-40 minutes.

The light is designed for outdoor applications and features a combination of spot and flood lights for maximum illumination.  The magnets are designed to attach 50 lbs each and won’t vibrate loose when the tractor is being used.  The switch box is weatherproof and the wiring harness is sealed for protection from the elements.  The 10 amp fuse will protect the whole assembly and tractor from any sudden surges.  The light kit comes with a 3 year warranty.

If you want a quick and easily-installed solution to the difficulty of using your tractor after dark, Get the RBI Tractor Light Bar.

NOTE: If you’d like to make the installation even simpler and you have an accessories port, order the accessories or cigarette lighter plug at checkout!

And while we’re on the subject of safety, take a quick look at the Cylinder Safety Stops. These stops securely prevent your loader from dropping while you work on or around the engine. Highly recommended!

RBI Tractor Light Owners Manual

(To my customers who ask which tractors they fit: They fit ANY tractor ROPS!)

What Customers Are Saying About This Product

“This system works amazing! These magnets are no joke – the light doesn’t even wiggle and is plenty bright. Installation was straightforward. Fishing the wiring up to the front battery was the most tedious part. Not hard, it just takes some focus (and lots of zip ties) to follow the factory wiring so it stays out of the way and secure. Appreciate you coming up with an industrial solution for this problem, Mike!” – John M.

      ~~~~~~~~~~~~~~~~~~~

“Just installed and used it and love it! I live in the mountains and do a lot of snow removal in the early morning when it’s still dark. My snow blower is a PTO-driven, rear mounted unit and so I have to drive in reverse and I have no lights pointing backwards. I’ve tried a headlamp (literally on my head) that’s never bright enough and I’ve tried battery-operated magnet-mounted lights where the magnets were too weak and fall off. Been frustrated with this for years.”

~~~~~~~~~~~~~~~~~~~

“Easy to install and VERY bright! Wire was longer than I needed which is great! I mounted the switch closer to the top of my rops so I can spin the light around for snow blowing at night. Shipping was prompt and the whole unit feels solid. This is not a cobbled together kit from a supply store.”  – Timothy C., from MA.

~~~~~~~~~~~~~~~~~~~~

“Just got this light bar today.  This thing is the bomb!  VERY bright…easy to hook up to ROPS…magnets very strong, but also used zip ties for an even stronger hold.  Wiring was a long process on my Kubota BX, but worth it spending the extra time doing it right.  What the video didn’t show was the great brackets that hold the light to the ROPS.  They look like SS and they are ADJUSTABLE…a nice upgrade.  If you need extra lighting on your tractor…you won’t be sorry with this:)  Thanks Mike!” – Jim T.

~~~~~~~~~~~~~~~~~~~~

I purchased the RBI LED tractor bar lights. They were more than what I expected and light up a very wide area. The item was shipped really early and connecting was very easy. It took maybe 20 minutes. I would recommend this product and Tractor Mike highly. – Robert, from Pennsylvania