The Stinger STP Tree Puller

The Stinger STP-34 Tree Puller is a great tool for environmentally-friendly land clearing from the comfort of your tractor seat!   The STP-34 is the perfect answer when it comes to economically removing undesirable invasive species, extracting vines, or pulling up trees by the roots with a tractor or skid loader. Whether you are pulling honeysuckle or grapevines out of tree canopies, uprooting blackberries or multi-flora rose, or pulling up large trees, the STP-34 is built for the job. With a 34” total opening width you can grab up to a 10″ tree near the back of the jaws, allowing greater clamping force and improved tractor or skid loader-to-tree pulling power.

The STP-34 is all-American made and built with a heavy-duty 6”x6”- ¾” thick front spade with serrated gussets on the sides. The ¾” thick steel plates close tightly to form an 8” surface that allows pulling of invasive shrubs and small diameter objects that would slide through the jaws of a normal tree puller. If you can’t pull the smaller diameter objects, they can be dug out with the standard front spade. The spade design is also helpful to pull large diameter trees. It allows you to dig around the tree base, breaking loose roots and enabling extraction.

Safety is also designed into this product. The STP-34 comes standard with a stout 20” tall/24” wide guard that is completely welded to the main frame to ensure operator safety.  The STP-34 can be equipped with either skid steer “Universal”, John Deere 100-500 “Hook & Pin”, or Euro/Global quick attaches and it carries a two-year warranty.

The STP-34 has been field tested and used in the most rugged and tough conditions. If you’ve been looking for the most economical and well-built answer to pulling trees with a tractor or small skid loader, here is the solution.  Compare the features and price to anyone else’s tree puller and you’ll choose the Stinger STP-34!

NOTE: DURING PEAK SELLING SEASONS, PRODUCT MAY NOT BE IN STOCK FOR IMMEDIATE SHIPPING.  IN WORSE-CASE SCENARIOS, LEAD TIME CAN BE UP TO 5 WEEKS. E-MAIL

su*****@as************.com











FOR ESTIMATED AVAILABILITY!

WHEN ORDERING YOU MUST SELECT THE CORRECT HYDRAULIC COUPLERS!

Consult the chart below to determine your hydraulic connections. There are two types generally used in tractor applications, Pioneer and Flat Face.

Pioneer couplers have either a ball, or a tip in the male portion that must be pushed back to attach.  Flat face couplers, commonly used on skid loaders, do not have any protrusions.

Each type comes in at least 3 sizes, and in order to send the right ones with your new attachment, we’ll need to know what type and size are on your tractor.  We also need to know whether you have one male and one female, two male, or two female couplers.  Add This Information To The ‘Order Notes’ Section Of The Checkout Page.

Without this information we cannot guarantee that our attachment will connect to your tractor.