John Deere 145, 146, 148 & 158 Pin-On Loader to Euro Global EURO-TACH Quick Attach Faceplate

Have a  John Deere 145, 146, 148 or 158 front-end loader and want to be able to convert it to the Euro/Global quick attach system? Then this is the kit for you. It’s a pin-on quick attach  for the new Euro/Global system, so you  remove and change attachments easily.  The Euro-Tach makes tractors compatible with the Global quick attach. It features a one handle horizontal latching system and an ISO 23206 design with a 25 degree backsheet angle to fit most attachments.  It’s a heavy duty, American-built quick attach that is guaranteed to fit the applications listed.

This kit DOES NOT INCLUDE weld-on female Euro brackets.  If you need those to convert your pin-on bucket to Euro, order the kit at this link.

If you want to modernize your tractor and open up a new world of attachment options, the Euro-Tach Quick Attach is for you!

THE EURO-TACH SYSTEM

QUICK AND EASY

The Euro-Tach™ quick attach is a convenient bracket for tractor loaders that allows quick and easy attachment changes. Just unlatch the quick attach with the single lever and back out of one attachment or bucket. Drive into another one, pick it up, latch the handle and go. Quick and easy!

EURO-GLOBAL COMPATIBILITY

This bracket is named the Euro-Tach for a reason. It allows you to use various European-style ISO standard 23206 or John Deere Global Carrier attachments that you may already have in your fleet. Swap attachments with most of the current models of large tractors with the Euro/Global hookup. That’s a benefit that can save you hundreds of dollars.

ADDED VERSATILITY

A quick attach on your loader allows you to do much more than just move dirt. Now your loader can be a versatile tool carrier. Think pallet forks, snow blades, tree diggers, bale spears, grapples, three-point hitch adapters, and manure forks. Using more attachments allows your loader to perform a wider variety of jobs. This versatility gives you the ability to become more profitable.

ADDS MANEUVERABILITY

The quick attach is not only helpful in what it can take on, but also in what it can take off. The loader bucket can be quickly removed to reduce the space needed to maneuver the tractor. When you need your bucket again it can be re-installed quickly.

SIMPLE INSTALLATION

The quick attach mounts directly to loader arms and cylinders, replacing the original bucket. It is available for many tractor loaders. No special pins or modifications to the loader are necessary. A weld-on, set of female Euro plates can convert the original bucket to accommodate the quick attach.

QUALITY CONSTRUCTION

The faceplate is constructed of heavy gauge steel to ensure the quick attach will last the life of your loader. A single, latch mechanism positively locks two pins firmly in place on the loader. The latching pins are hardened for long life.