Some folks call it Pat’s Quick Hitch. Some call it Pat’s Easy Change. Either way, Pat’s Easy Change Three Point Tractor Quick Hitch system is patented. Don’t be fooled by cheap 3 point quick hitch imitations!
Here’s a 3 point quick attach system that is truly universal. No other system has the set screws and u-bolts for stabilization. Pat’s system comes with shims to adjust the Pat’s quick hitch to your tractor. Our spring loaded latch system is the only one like it available on the market.
Plus, our product is made of quality hot rolled steel, and made in America.
Determine the size you need and then order either the Pat’s Quick Hitch Cat 1 quick hitch or the Pat’s Quick Hitch Cat 2.
Pat’s Easy Change Quick Hitch is the answer when you’re looking for the quickest and most pain-free way of changing three point tractor implements!
Pat’s Easy Change Quick Hitch for Canadian Customers
$169.99 – $244.00
The Three Point Quick Hitch You Need!
Looking for the magic formula to make hooking up three point implements easier?
Here it is! Pat’s Easy Change Quick Hitch is an “eagle claw” attachment that goes on each of the lower link arms – what you see on a lot of larger tractors.
To attach an implement, just back up under the pins, lift up the three point and you’re hooked on, except for the top link. Hop off the seat, put the top link on and you’re good to go! This tractor quick hitch will save you time and effort. When you want to unhook, just move the keepers to the side, pull up up the links and lower your three point. It’s that simple.
Pat’s 3 point quick hitch system has a rod that keeps the lower link arms at the correct width when backing up. If you have multiple implements you’ll want to put a mark on the rod for each one. That way, you can set the correct width for the implement before backing up. Before ordering this Pat’s quick hitch, determine what category size your lower links are. They’re offered in category I or category II configurations. Measure your tractor’s lower three point arm ball holes to determine the category. 7/8″ is the category I quick hitch, and 1 1/16″ is category II.
You can installation Pat’s easy hitch system in about thirty minutes. You’ll be impressed by how secure this tractor quick connect system is when mounted properly. It’s one of those products that will make your tractor-owning experience a lot easier.
Share or Email This Post
|Tractor Lower Link Size|
Category I (7/8" holes), Category II (1 1/8" holes), Category III (1 7/16" holes), Category I (without stabilizer), Category II (without stabilizer), Category III (without stabilizer), Category I to II (tractor is I, implements are II), Category II to I (tractor is II, implements are I), Category I to II (without stabilizer), Category II to I (without stabilizer), Category #I Weld On, Category #II Weld On, Category #III Weld On, Category #I Weld On (without stabilizer), Category #II Weld On (without stabilizer), Category #III Weld On (without stabilizer)