- Lube-Shuttle Grease Gun makes changing grease cartridges a clean job
- This is a no mess grease gun
- No losses of grease while hanging on the wall
- Has a WORKING pressure of 4300 PSI!
- Zinc plated steel tube is corrosion resistant
- The high pressure nylon hose (included) has a 14,450 PSI burst pressure rating
- Standard grease coupler included with every Lube Shuttle
- Great for farm applications, construction equipment, fleets, cities and municipalities
- No air gaps
- No spring and plunger assembly to mash fingers
- High pressure system delivers grease to areas where cheap third world built “farm store” grease guns fail to reach
- Reusable and recyclable cartridges
- Made in Germany
- ADD safeLOCK TO TAKE ALL THE MESS OUT OF GREASING!
G200- a deluxe multi-purpose grease exceeding the majority of original equipment manufacturers recommendations for new tractors. It’s our most popular grease; and the one I used on my tractor and lawn mower. It has a lithium complex, heavy base oil and EP additives that give it great pressure resistance and make it excellent for use in many demanding agricultural, heavy construction, industrial, manufacturing, recreational, and automotive applications.
MoS2-contains 3% molybdenum disulfide and is a lithium-based, multi-purpose grease which should be utilized for high stress wheel and friction bearings found in heavy construction equipment, and industrial machines. MoS2 features corrosion inhibitors, polymers for exceptional metal adhesion, and anti-oxidant additives making it a great choice for high temperature and extreme pressure applications.
P100-is a light base oil, polyurea thickened grease that excels at start-up lubrication at low temperatures while also offering great protection at high temperatures. It is the best in its class in terms of basic stability, corrosion protection, oxidation stability, and low wear, volatility, and oil bleed. These properties make AirTec P100 the best choice for sealed bearings, wheel bearings, CV joints, and electric motor bearings.
KH150-a full-synthetic grease, thickened with a calcium complex designed for ultimate performance. Calcium thickened greases have greater stability and higher mechanical and shear stability than lithium greases. They’re also more water resistant and require no additives for corrosion prevention. This synthetic product offers more consistent lubrication, lower operating temperatures and longer equipment life than non-synthetic offerings and is the ultimate choice for maximum equipment life.
GREASE SPECS G200 MoS2 P100 KH100
Base Oil Vis. (40°C) 195mm2/s 155 mm²/ 100mm 150mm2/s Temperature Range -30°C to +130°C -30 +130°C -20°C to +140°C -40°C to +160°C
Drop Temperature 190°C 190°C 240°C 240°C Specifications NLGI 2 KPF 2 K-30 NLGI CI. 2 NLGI 2 NLGI 1-2
(All choices are DIN 51502)
Lube-Shuttle NO-MESS Pistol Grip Grease Gun for Canada, Alaska & Hawaii
$58.95 – $269.95
“Last week I ordered your Lube-Shuttle & 10 tubes. I was a bit apprehensive due to the cost. But today I lubed my riding mower. What an improvement! The Lube-Shuttle is worth every penny.” -Mike R, “The Other Mike”
Lube Shuttle solves all of the problems of traditional grease guns! With no plunger, when the tube is ready to change you unscrew the old one, push out grease with the plunger in the bottom of the new tube, screw it in and you’re ready to go. It’s that simple! It won’t ooze grease because there’s not pressure in there until you crank the handle, and then there’s a LOT of pressure.
The plunger and the premium components inside put out over 4300 pounds of pressure, pulling the grease out of the tube and forcing it to the bearings. Because of that pressure, it’ll put grease in places that those cheap, third-world farm store grease guns won’t get. So your equipment will last longer!
Grease for Lube Shuttle is comparably priced with what you’re using now, and the grease canisters are plastic and recyclable.
The product has been available in Europe for a number of years and is just now arriving in the North American market. After using this grease delivery system, you’ll NEVER go back to the old style grease gun. It’s literally a product that will change your attitude about equipment maintenance, especially if you use a lot of grease.
Share or Email This Post
|Dimensions||16 × 8 × 4 in|
|Type of Grease|
G200 Premium Multi-Purpose (good for most tractor applications and the most popular seller), MOS2 High Pressure Moly, P100 Polyurea, KH 150 Full Synthetic, No grease, I just want a grease gun
|Number of Grease Tubes|
Case of Ten, Package of Two, Grease Gun Only
NEW safeLOCK Long Reach Locking Coupler, Standard safeLOCK Locking Coupler, I Just Want a Standard Grease Coupler