For Tractors with 6-15 Gallons per Minute Hydraulic Flow
|Maximum Output Torque||1500 ft/lb|
|Recommended Fluid Flow||6-15 gpm|
|Maximum Pressure-Continuous||3500 psi|
|Recommended Max Auger Dia-Dirt||12 in|
Belltec LC150 Front Loader Post Hole Digger/Auger
The Belltec LC150 Front Loader Post Hole Digger/Auger may be the answer to one of your biggest headaches.
If I had to pick my all-time least favorite tractor attachment it would be a three point post hole digger. Don’t get me wrong, they work great for digging holes, they’re just a huge pain to hook up and store. They’re top heavy and can fall on you when you’re attaching them to the tractor, they’re difficult to store in a barn or shed and take up a lot of space, and they lack down pressure. All of these problems are solved with the Belltec LC150 front end loader-mounted, hydraulic drive post auger. It’s one of my favorite products.
You have to have hydraulic remote connections on the front of your tractor to run the LC150. If you don’t have them, check out my X-Tra Valve Kit. Once you have hydraulic capabilities at the front of your tractor, the LC-150 will mount to any tractor with skid loader compatible quick attach on the front. The LC-150 stores in a smaller area than three point mounted post hole diggers, it mounts very easily, and because its on the front end loader, you have down pressure built right in.
The LC-150 works on any tractor or skid loader with between 6-15 gallons of hydraulic flow and it features planetary gear reduction, heavy duty bushings in the swivel and a reversible hydraulic motor. It puts out a maximum torque of 1500 foot pounds and has a maximum continuous pressure of 3500 PSI. Best of all, it’s built by Belton, Texas-based Belltec Industries, who has been designing, patenting and producing the world’s most efficient drilling equipment for more than two decades.